| Nozzle | Suggested |
| Nozzle Diameter | 0.40 mm |
| Extrusion Multiplier | 0.90 |
| Retraction | |
| Retraction Distance | 3.50 mm |
| Retraction Speed | 1800.0 mm/min |
| Temperature | |
| Nozzle Temperature | 250C |
| Bed temperature | 60C |
| First Layer Settings | |
| First Layer Height | 90% |
| First Layer Width | 100% |
| First Layer Speed | 50% |
| Layer Settings | |
| Primary Layer Height | 0.1500 mm |
| Top Solid Layers | 5 |
| Bottom Solid Layers | 4 |
| Outline/Perimeter Shells | 2 |
| Speeds | |
| Default Printing Speed | 3000.0 mm/min |
| Outline Underspeed | 50% |
| Solid Infill Underspeed | 80% |
| Bridging | |
| Unsupported area threshold | 50.0 sq mm |
| Bridging extrusion multiplier | 95% |
| Bridging speed multiplier | 70% |
